Managing Power over Ethernet (PoE) Power over Ethernet Specifications
OmniSwitch 6860 Hardware Users Guide October 2022 page 4-3
Power over Ethernet Specifications
The table below lists general specifications for Power over Ethernet support. For more detailed power
supply and Power Source Equipment (PSE) specifications, refer to Chapter 3, “Chassis and Power
Supplies.”
Viewing Power Supply Status
To view the type and status for installed power supplies, use the show powersupply command:
-> show powersupply
Total PS
Chassis/PS Power Type Status Location
-----------+---------+--------+--------+-----------
1/1 920 AC UP Internal
Total 920
IEEE Standards supported
IEEE 802.3; 802.af; 802.3at, 802.3bt
PoE Class Detection Supported
Platforms supporting PoE OS6860-P24; OS6860-P48; OS6860E-P24; OS6860E-P48;
OS6860E-P24Z8, OS6860N-P48Z, OS6860N-P48M
Range of inline power per port OS6860 models:
- 3000-30000 milliwatts on all ports.
OS6860E (Enhanced) models:
- 3000-60000 milliwatts on ports 1 through 4.
- 3000-30000 milliwatts on ports 5 and higher.
OS6860E-P248Z8:
- 3000-30000 milliwatts on ports 1 through 16.
- 3000-75000 milliwatts on ports 17 through 24.
OS6860N-P48Z:
- 3000-60000 milliwatts on ports 1-36.
- 3000-95000 milliwatts on ports 37-48.
OS6860N-P48M:
- 3000-95000 milliwatts on ports 1-48.
OS6860N-P24Z:
- 3000-60000 milliwatts on ports 1-12.
- 3000-95000 milliwatts on ports 13-24.
OS6860N-P24M:
- 3000-95000 milliwatts on ports 1-24.
Maximum PoE power per slot Use the show lanpower command to determine PoE power avail-
able.
To Next Page
Loading...
