Alcatel-Lucent OmniSwitch 6860 - Monitoring Omniswitch BPS Components; Viewing General Power Supply Information

Monitoring OmniSwitch BPS Components OmniSwitch Backup Power Shelf/System (BPS)
page 4-26 OmniSwitch 6860 Hardware Users Guide May 2014
Monitoring OmniSwitch BPS Components
The following commands have been added or modified for OmniSwitch BPS support on OS6860 switches.
Viewing General Power Supply Information
To display information on all system power supplies, including those installed in the OmniSwitch BPS
chassis, use the show system command.
To display information on the OmniSwitch BPS chassis, and installed OS-BPS power supplies, use the
show powersupply bps shelf command.
To display the connector priority for power supplies currently installed in the OmniSwitch BPS chassis,
use the show power-shelf bps-connector-priority command.
Note. For detailed information on these commands, as well as OmniSwitch BPS configuration commands,
refer to the OmniSwitch CLI Reference Guide.