Alcatel-Lucent OmniSwitch 6860 - OS6860-BPPH 600 W Power Supply; OS6860-BPPH LED States

Power Supplies Chassis and Power Supplies
page 3-32 OmniSwitch 6860 Hardware Users Guide May 2014
OS6860-BPPH 600W Power Supply
OS6860-BPPH 600W AC Power Supply Front Panel
Note. Mixing different wattage power supplies (e.g., 600W and 920W) in a switch chassis is not
supported. Redundant power supplies must be like models.
Load Sharing Support. When two 600W PoE power supplies are installed, each power supply provides
electrical load sharing for PoE. For example, two 600W power supplies provide 450W + 450W (or 900W)
in total PoE power.
OS6860-BPPH LED States
Model OS6860-BPPH
Models Supported OS6860-P24, OS6860E-P24/P24M, OS6860-P48,
OS6860E-P48
Input Voltage/Current 90 V to 136 V AC /8.5 A
180 V to 264 V AC/4.25 A
Max. Output Power/Current 600 W/11 A
Max. Output for System Power 150W
Max. Output for PoE Power 450W
LED State Description
AC OK LED Solid Green AC power is good
AC OK LED Solid Red There is an AC power issue
DC OK LED Solid Green DC power is good
DC OK LED Solid Red There is a DC power issue
AC Connector
Air Vent
Lock Tab
Status LEDs