Show Commands
Page 130 7210 SAS D, E OS Router Configuration Guide
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default Clears all counters associated with the MAC filter policy entries
Parameters mac-filter-id — The MAC filter policy ID.
Values 1 — 65535
entry-id — Specifies that only the counters associated with the specified filter policy entry will be
cleared.
Values 1 — 65535
ingress — Specifies to only clear the ingress counters.
egress — Specifies to only clear the egress counters.
To Next Page
Loading...
