Alcatel-Lucent 7210 SAS - Page 47

IP Router Configuration
7210 SAS D, E OS Router Configuration Guide Page 47
Redirects : Number - 100 Time (seconds) - 10
Unreachables : Number - 100 Time (seconds) - 10
TTL Expired : Number - 100 Time (seconds) - 10
===============================================================================
A:SIM7#
*A:Dut-C# show router 1 mvpn
===============================================================================
MVPN 1 configuration data
===============================================================================
signaling : Bgp auto-discovery : Enabled
UMH Selection : Highest-Ip intersite-shared : Enabled
vrf-import : N/A
vrf-export : N/A
vrf-target : target:1:1
C-Mcast Import RT : target:10.20.1.3:2
ipmsi : pim-asm 224.1.1.1
admin status : Up three-way-hello : N/A
hello-interval : N/A hello-multiplier : 35 * 0.1
tracking support : Disabled Improved Assert : N/A
spmsi : pim-ssm 225.0.0.0/32
join-tlv-packing : N/A
data-delay-interval: 3 seconds
data-threshold : 224.0.0.0/4 --> 1 kbps
===============================================================================
route-table
Syntax route-table [ip-address [/mask] [longer|exact]]|[summary]
Context show>router
Description This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters ip-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length.
Values ipv4-address: a.b.c.d (host bits must be set to 0)
ipv4-prefix-length: 0 — 32
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
exact — Displays the exact route matching the ip-prefix/mask masks.
summary — Displays a route table summary information.
Output Standard Route Table Output — The following table describes the standard output fields for the
route table.
Label Description
Dest Address
The route destination address and mask.