IP Router Configuration
7210 SAS D, E OS Router Configuration Guide Page 57
route-table
Syntax route-table [ip-prefix/prefix-length]
route-table ip-prefix/prefix-length longer
no route-table
Context debug>router>ip
Description This command configures route table debugging.
Parameters ip-prefix — The IP prefix for prefix list entry in dotted decimal notation.
Values ipv4-prefix a.b.c.d (host bits must be 0)
ipv4-prefix-length 0 — 32
longer — Specifies the prefix list entry matches any route that matches the specified ip-prefix and pre-
fix mask length values greater than the specified mask.
To Next Page
Loading...
