Filter Policies
7210 SAS D, E OS Router Configuration Guide Page 97
Configuration Commands
Generic Commands
description
Syntax description string
no description
Context config>filter>ip-filter
config>filter>ip-filter>entry
config>filter>mac-filter
config>filter>mac-filter>entry
Description This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
context in the configuration file.
The no form of the command removes any description string from the context.
Default none
Parameters string — The description character string. Allowed values are any string up to 80 characters long
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
To Next Page
Loading...
