1.1.3 Call management screen
Incoming call icon, Call in
progress, Call on hold, …
Soft keys: actions available
depending on the call status
(when presentation screen is
not displayed)
Notification (popup) of
incoming call
Each tab corresponds to a call, the status of which is symbolized by its icon (in progress, call on hold,
arrival of new call). When a call is in progress, press on the corresponding tab to look at calls on hold or
incoming calls.
All features are accessible while the call is displayed on the screen. Use the Up and Down arrows to
move up or down a page. These functions (transfer, conference, etc.) are directly related to the status of
the call consulted. For example, the transfer function will not be available between a call in progress or on
hold and an incoming call.
Used to switch from the conversation screen to the welcome screen.
Calls can also be managed from the Perso page. While the call is in progress, press the Back/Exit key
and display the Perso page. Calls in progress or waiting calls are displayed on the different line keys. It
is then possible to converse with the contact of your choice by pressing the key associated to the
contact.
1.1.4 Access to the user local menu
or (long press): Open the user local menu: Audio, Display, Bluetooth®, Skin (See: User local
menu).
1.1.5 Change the theme (skin) of your phone
• The phone is in idle state.
• or (long press) Skin
• Select the desired new theme from the list.
•
Changing the theme may take a few seconds.
A corporate theme can be installed by your administrator. In this case, you cannot change the theme.
The ringtone settings can be integrated into a theme.
1.1.6 Busy light logo on back shell
The logo on back shell can be illuminated. The color changes when you are busy.
• The phone is in idle state.
• or (long press) Display Advanced Busy light
• Activate or deactivate the logo LED feature.
•
1.1.7 Bluetooth Smart Ready
Your phone is 'Bluetooth® Smart Ready'. It can receive and share Bluetooth® signals
from various Bluetooth® devices (Bluetooth® and Bluetooth® Smart or Low-energy devices). It is
ready for future services available on the fly in a subsequent software upgrade. This feature can be
deactivated by the administrator.
To Next Page
Loading...
