Alcatel-Lucent 8234 - Headphone; External Microphone

List of accessories
8AL90386ENABed01
71 /76
8254 DECT Handset
8234 DECT Handset
To remove the battery: Lift the battery out
of the compartment.
Inserting the battery:
• Position the battery 'connectors '
side as shown in the drawing (A).
• Terminate the installation of the
battery in its compartment by
pressing as shown in the drawing
(B).
Replace the cover.
If you are using a 8254 DECT Handset,
please make sure that the lock is correctly
positioned.
9.9 Headphone / external microphone
The side of the telephone features a 3.5 mm jack connector for headphone / external microphone. Contact
your retailer for information on the various headphone models available.
The jack is protected by a cover. Lift the cover to plug in the jack connector. The jack connector is a 3.5
mm, 4-pole jack (TRRS standards: CTIA).
Jack connector - CTIA standards
A
Microphone
B
Ground
C
Audio (right)
D
Audio (left)
A
B
A




B