Alcatel-Lucent 8950 AAA - Page 443

List of Server CommandsServer Diagnostics and Control Commands
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
24-17
............................................................................................................................................................................................................................................................
<rule> ::= [<areaCondition>] [<itemCondition>] [<logLevel>]
[<pattern>] {<channel>}
[<areaCondition>]::= AREA=<wildcarad value>
[<itemCondition>]::= <variable expression> =<wildcard value>
.
logrule areas
Description: Lists available areas.
Command Format: logrule areas
There are no arguments for this command.
logrule clear
Description: Clears all logging rules.
Command Format: logrule clear
There are no arguments for this command.
logrule delete
Description: Deletes a logging rule.
Command Format: logrule delete <num>
logrule insert
Description: Inserts a logging rule.
<rule> ::=
[<areaCondition>]
[<itemCondition>]
[<logLevel>]
[<pattern>]
{<channel>}
Specifies the section of the 8950 AAA
server where the message is generated.
rule may be expressed as
areaCondition, itemCondition,
logLevel, pattern,
or channel.
<areaCondition>:=
AREA=<
wildcarad value>
areaCondition may be expressed as
AREA=<wildcard value>.
<itemCondition>::=
<variable expression>
=<wildcard value>
Specifies an expression to match attributes
and values.
itemCondition may be expressed as
<variable expression> =<wildcard
value>.
<num> The log rule number to be deleted.