............................................................................................................................................................................................................................................................
List of Server CommandsServer Diagnostics and Control Commands
24-18
365-360-001R6.0
Issue 1, December 2008
............................................................................................................................................................................................................................................................
Command Format: logrule insert <num> <rule>
<num> <rule> ::= [<areaCondition>] [<itemCondition>]
[<logLevel>] [<pattern>] {<channel>}
[<areaCondition>]::= AREA=<wildcard value>
[<itemCondition>]::= <variable expression> =<wildcard value>
logrule list
Description: Lists logging rules.
Command Format: logrule list
There are no arguments for this command.
Example:
==> logrule list
1 area * INFO <ALL> LogToFile
==>
logrule load
Description: Loads logging rules from a file.
Command Format: logrule load <fileName>
logrule move
Description: Moves a logging rule.
Command Format: logrule move <num> <num>
logrule remove
Description: Deletes a logging rule.
<num> Specifies where to insert this log rule.
<rule> ::= [<areaCondition>]
[<itemCondition>]
[<logLevel>] [<pattern>]
{<channel>}
rule may be expressed as
areaCondition, itemCondition,
logLevel, pattern
, or channel.
[<itemCondition>]::= <variable
expression> =<wildcard value>
itemCondition may be expressed as a
variable expression, or a wildcard
value.
<fileName> The name of the file from which the logging
rules will be loaded.
numb The start and end logging rule numbers to be
moved.
To Next Page
Loading...