Alcatel-Lucent IP Touch 4008 - Quick Reference Guide Manual

Customize Your Phone
Modifying your personal code
Lock / unlock your telephone
6 - Settings
OK
4 - Options
OR
OK
1 - Password
OK
3 - Lock
OK
2
6
5
3
ab c
def
jkl
mno
Adjusting the Audio Functions
Adjusting Screen Brightness
Using Your Telephone
Display Your Extension Number
Making a Call
Increase or decrease
the contrast.
6 - Settings
OK
3 - Set
OK
1 - Ringing
OK
6 - Settings
OK
3 - Set
OK
2 - Contrast
OK
OR
OK
1-Who Am I
OK
OR OR
OR
OK
OR
2
6
5
3
ab c
def
jkl
mn
o
Alcatel-Lucent Enterprise IP Touch 4018
Handset
Audio Keys
Function Keys
.
.
Navigation
1 - Who Am I
2 - Redial List
3 - Lock
OK
Function Keys and Programmable Keys
.
Alphanumeric keypad
Alcatel-Lucent IP Touch 4008 / 4018 Phone & 4019 Digital Phone
www.iconcloud.com
Up-down Navigator: Used to navigate around
the home page, through the menus or in a text
field when entering characters.
The home page includes:
Phone status information such as locked,
call forward, etc.
Date and time.
Phone programming and configuration
functions.
OK Key: Used to validate your selection when programming or
configuring the set.
Back/Exit Key: Returns the display to the previous screen or menu
(short press) or return to the home screen (long press). You can also use
this key as a backspace key when entering text.
Hang-up Key: to terminate a call.
Hands-free/Loudspeaker Key: to make or answer a call without
lifting the receiver (Alcatel-Lucent IP Touch 4008 / 4018)
SOLID: In hands-free mode (short press)
FLASHING: In loudspeaker mode (long press)
Intercom/Mute Key:
During a conversation press this key so that the outside party
cannot hear you speak.
When station is idle press this key to answer calls automati-
cally without picking up the receiver.
Volume Control: To increase or decrease the loudspeaker or handset
volume
Messaging Key to access message services. When flashing indicates a
new voice or text message has been received.
Redial Key:
Redial the last number (short press).
Choose from list of last 10 number (long press).
To avoid accidentally damaging the set telephone line connector make sure you
position the cord correctly in the compartment intended for this purpose.
Guide Key: Display information about a pre-programmed key, access set
programming and configuration screens.
Phone Book Key: Access your personal phone book (short press) or
access dial by name feature (long press).
Pre-programmed Function Keys: Lit when the function associated with
the key is activated. The 6-key block is programmed as follows in default:
Two line keys.
One Immediate Forwarding / Cancel Call Forwarding key.
One Conference key.
One Hold key.
One Transfer key.
Follow prompts
on display.
Depending on the
displayed information,
enter your password or
confirm.
Adjust ringing mode, melody or
volume by following the instructions
displayed on the screen.
Long press
to return to
the home
screen.
Long press
to return to
the home
screen.
Apply
Displays your
extension number.
Long press
to return to
the home
screen.
Lift the
receiver.
Press the
hands-free key.
Press a line
key.
Choose a contact from your
personal directory.
Use the number pad to
manually dial the number.
To make an external call dial the outside line access code
(typically “9”) before dialing the outside phone number.
OPEN TOUCH OFFICE CLOUD
OMNI PCX OFFICE