To Next Page
X
xballAug 19, 2025
Why is my Alcatel-Lucent IP Phone showing 'DHCP NOT RESPONDING'?
- GGregory BennettSep 12, 2025
If your Alcatel-Lucent IP Phone displays 'DHCP NOT RESPONDING', the server is not responding. Please, check your server connection.
Why is my Alcatel-Lucent IP Phone showing 'DHCP NOT RESPONDING'?
If your Alcatel-Lucent IP Phone displays 'DHCP NOT RESPONDING', the server is not responding. Please, check your server connection.
What to do if TFTP server is not responding on Alcatel-Lucent IP Phone?
If your Alcatel-Lucent IP Phone shows 'TFTP NOT RESPONDING', it indicates that the TFTP server is not responding. Check your TFTP server connection.
What to do if my Alcatel-Lucent IP Touch 4008 IP Phone has no Ethernet link?
If your Alcatel-Lucent IP Phone displays 'NO ETHERNET LINK', it means the Ethernet link is not connected. Ensure that the LAN port is properly connected.
What causes TFTP server error on Alcatel-Lucent IP Touch 4008 IP Phone?
If your Alcatel-Lucent IP Phone displays 'TFTP SERVER ERROR', it means that there is an error on the TFTP server. Please, check your TFTP server status.
What to do if router ping failed on Alcatel-Lucent IP Phone?
If your Alcatel-Lucent IP Phone displays 'ROUTER PING FAILED', the router is not responding to ping requests. Check the router's connectivity and configuration.
What does 'ADDRESSES MISMATCH' mean on Alcatel-Lucent IP Touch 4008 IP Phone?
If your Alcatel-Lucent IP Phone displays 'ADDRESSES MISMATCH', it indicates that the address, mask, and router settings do not match. Ensure these settings are compatible within your network configuration.
What to do if Alcatel-Lucent IP Touch 4008 displays 'FILE TOO LARGE'?
If your Alcatel-Lucent IP Phone displays 'FILE TOO LARGE', it means that the file is too large to be downloaded. Use a smaller file.
What to do if my Alcatel-Lucent IP Phone displays 'BAD FILE CONTENT'?
If your Alcatel-Lucent IP Phone displays 'BAD FILE CONTENT', it means that an error was found in the downloaded file. Please, check your file.
What to do if Alcatel-Lucent IP Touch 4008 shows 'FLICKERING FAILED'?
If your Alcatel-Lucent IP Phone displays 'FLICKERING FAILED', it means that the downloaded binary failed to flash. Try flashing again.
What does 'RESOURCES NOT FOUND' mean on Alcatel-Lucent IP Touch 4008?
If your Alcatel-Lucent IP Phone displays 'RESOURCES NOT FOUND', it means that the resources file was not found in flash memory. Check your flash memory.
General| Brand | Alcatel-Lucent |
|---|---|
| Model | IP Touch 4008 |
| Category | IP Phone |
| Language | English |
How to mute and unmute the microphone during active calls for privacy.
Transfer a call after speaking with the recipient to announce the incoming call.
Transfer a call directly to another extension without speaking to the recipient.
