Do you have a question about the Alcatel-Lucent IP Touch 4088 EE and is the answer not in the manual?
Describes the process of initializing an IP Touch set in SIP mode.
Details mandatory and optional configuration files for SIP sets, including sipconfig.txt and sipconfig-MacAddress.txt.
Specifies the location and availability of SIP binary files for Alcatel-Lucent IP Touch phones.
Outlines the procedures for updating the SIP binaries on an IP Touch set.
Introduces the PCX features available for SIP stand-alone mode sets.
Explains how to access voice mail via the dedicated key and its configuration parameters.
Provides a detailed description of the structure and parameters within SIP configuration files.
Describes the module covering error/information messages and the Ethernet link table.
Lists error and information messages displayed during the starting phase.
Explains Ethernet port auto-negotiation and manual configuration for QoS.
Describes the process of initializing an IP Touch set in SIP mode.
Details mandatory and optional configuration files for SIP sets, including sipconfig.txt and sipconfig-MacAddress.txt.
Specifies the location and availability of SIP binary files for Alcatel-Lucent IP Touch phones.
Outlines the procedures for updating the SIP binaries on an IP Touch set.
Introduces the PCX features available for SIP stand-alone mode sets.
Explains how to access voice mail via the dedicated key and its configuration parameters.
Provides a detailed description of the structure and parameters within SIP configuration files.
Describes the module covering error/information messages and the Ethernet link table.
Lists error and information messages displayed during the starting phase.
Explains Ethernet port auto-negotiation and manual configuration for QoS.
| Model | IP Touch 4088 EE |
|---|---|
| Type | IP Phone |
| Speakerphone | Yes |
| Supported Protocols | SIP, H.323 |
| Network Ports | 2 x 10/100 Mbps Ethernet |
| Power Supply | PoE (Power over Ethernet) IEEE 802.3af |
| Headset Port | Yes |











