3. Mode 3: Typical modification
4. Mode 4: Expert
5. Mode 5: Multisite
Important:
Access to modes 2, 3, 4 and 5 is password protected: pbxk1064 (using the OMC tool)
Access to modes 2 and 3 is password protected: help1954 (using the OMC Easy tool)
6.2.5.1 Mode 1: Data and tool repository
This mode is used to create .crp files offline (collective customer directories) which are used in
the Typical Installation menu.
6.2.5.2 Mode 2: Typical installation
This mode is used for online manual programming by choosing between Company and Hotel
and automatically on-line using .crp files.
Remark:
The choice Company/Hotel is only offered once. It is necessary to perform a cold reset to see it again.
6.2.5.2.1 Initial Business Installation Wizard
- IP configuration
- As of R9.1, DHCP configuration for:
• Alcatel-Lucent IP devices:
• Enabling/disabling DHCP server (enabled by default)
• Configuration of four DHCP IP address ranges (DHCP1 to DHCP4)
• Default values only for DHCP1 (192.168.92.10 to 192.168.92.39)
• Omniswitch:
• Enabling/disabling DHCP server (enabled by default)
• Configuration of one single DHCP IP address range (default values: 192.168.92.5
to 192.168.92.9)
- Default Numbering Plan
- Installation number
- Operating mode
- Channels and Bundles
- DECT ARI
- Creation of DECT handsets
- Metering
- Date and time
- Terminal List
- Various Subscribers
- Collective speed dial
- OS groups
Chapter
6
*
6-26
To Next Page
Loading...
Need help?
General
