3.3.1 Services controlled by the "Main" software key
The following table lists the functions controlled by the "Main" software key. If a software key is
not present in the system, or is incorrect, the system starts in a limited state. The table also
gives the limited state service levels, the granularity of upgrades, the maximum service level
for each service, and if a hardware extension exists.
Controlled services Relevant
software
version
Values in
limited
mode
Modularity Max Hardware
extension
STANDARD TELEPHONY
Number of digital sets All According to
selected
model
+1 236
Number of analog sets All +1 236
MOBILITY
Number of DECT sets All 0 +1 200
Number of DECT sets (with IP DECT) From R9.0 0 +1 50
Number of Mobile IP Touch sets From R5.0 0 +1 120
CALL MANAGEMENT
ARS All open in
R1.0/R1.1,
closed from
R2
open NO
DISA/Transit DISA All open NO
ISVPN on ISDN (ARS required) All closed open NO
QSIG + (ARS required) All closed open NO
Number of Meet Me Conference From R5.1 0 + 1 1
Enhanced Automated Attendant
(EAA)
From R6.0 0 + 1 5 Yes
From R8.0:
No
NETWORKS
Number of B-channels All 0 +1 120
Number of B-channels on MIX boards From R4 0 +2 120
WEB APPLICATION
Number of My IC Web for Office ses-
sions
From R8.1 0 1 from
R8.1: 50
from
R9.0: 50
SNMP
SNMP activation From R2.1 closed opened
RAS
number of access (b channels) From R2 0 +2 16
LAN TELEPHONY
Chapter
3
# %$
3-4
To Next Page
Loading...
Need help?
General
