Small Form-Factor Pluggables (SFP/SFP+/QSFP+) Gigabit Ethernet Transceivers
OmniSwitch AOS Release 8 Transceivers Guide January 2017 page 1-9
SFP-GIG-CWD
Coarse Wavelength Division Multiplexing (CWDM) is an optical transceiver supporting single-mode fiber
over various wavelengths. CWDMs are hot-pluggable and are available for long-reach applications.
Connector Type LC
Standards Supported 802.3z, SFP MSA
Connections Supported 1000Base-LX
Fiber Type SMF
Wavelength 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610
Optical Power Output -2 to +3 dBm
Receiver Sensitivity -24 dBm
Transmission Distances ~62 km
Operating Temperature -5 ºC to 70 ºC
Digital Diagnostic Monitoring Not Supported
SFP-GIG-T
Gigabit SFP Copper Transceiver.
Connector Type RJ-45
Standards Supported 802.3z, SFP MSA
Connections supported 10/100/1000Base-T
Cable Type CAT5, CAT5e, CAT6
Transmission Distance
100 m
Digital Diagnostic Monitoring Not Supported
SFP-GIG-EXTND
Gigabit SFP Optical Transceiver.
Connector Type LC
Standards Supported 802.3, SFP MSA
Connections Supported -
Fiber Type MMF
Wavelength 1310 nm
Saturation Power 0 dBm
Transmission Distance ~2 km
Operating Temperature 0 ºC to 70 ºC
Digital Diagnostic Monitoring Supported
To Next Page
Loading...
