Need help?Do you have a question about the Alcatel-Lucent OmniSwitch OS6450-24 and is the answer not in the manual?
General| Brand | Alcatel-Lucent |
|---|---|
| Model | OmniSwitch OS6450-24 |
| Category | Switch |
| Language | English |
Details the various chassis configurations available for OmniSwitch 6450 models.
Highlights key features like security, availability, and specific protocol support.
Explains the ability to add/remove hardware components without powering off.
Provides instructions and requirements for installing the OmniSwitch 6450 hardware.
Details environmental and electrical requirements for installing the switch.
Explains essential clearance requirements for proper airflow around the switch.
Details the steps for logging into the switch using default credentials.
Details the hardware components of the OmniSwitch 6450-10 model.
Details the hardware components of the OmniSwitch 6450-P10 model.
Details the hardware components of the OmniSwitch 6450-24 model.
Lists detailed technical specifications for the OmniSwitch 6450-U24S model.
Describes the process of booting the OmniSwitch, including LED status indicators.
Lists general specifications for Alcatel-Lucent's Power over Ethernet support.
Details how to configure PoE settings and parameters.
Details how to enable or disable PoE using CLI commands.
Details how to enable or disable priority disconnect.
Lists specifications for OmniSwitch 6450 stacking, including models and cable types.
Describes the primary, secondary, and idle roles within a stack.
Explains the importance of unique slot numbers for modules in a stack.
Provides guidelines for adding or removing modules from a stack without disruption.
Explains how to perform a full reboot of the virtual chassis stack.
Explains manual and automatic methods for recovering from a stack split.
To Next Page