Need help?Do you have a question about the Alcatel-Lucent OmniSwitch OS6450-P48 and is the answer not in the manual?
General| Model | OS6450-P48 |
|---|---|
| Product Type | Switch |
| Manageable | Yes |
| Ports | 48 |
| PoE+ | Yes |
| PoE Budget | 740W |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| VLANs Supported | 4094 |
| Form Factor | Rack-mountable |
| Power Supply | Internal |
| MAC Address Table Size | 32000 |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Input Voltage | 100 to 240 VAC |
| Weight | 6.5 kg |
Details different chassis models and their port configurations.
Provides instructions for hardware installation and site preparation.
Guides users through the initial login and basic configuration steps.
Details features, front and rear panels, and power supply for the 6450-10 model.
Details features, front and rear panels, and power supply for the 6450-24 model.
Details features, front and rear panels, and power supply for the 6450-P48 model.
Defines roles like primary, secondary, and idle modules in a stack.
Explains how the system detects and handles stack splits due to link failures.
To Next Page