Alcatel-Lucent OmniSwitch OS6450-24 - Omniswitch 6450-P10 S; Front Panel

OmniSwitch 6450-P10S OmniSwitch 6450 Chassis and Hardware Components
page 3-8 OmniSwitch 6450 Hardware Users Guide September 2015
OmniSwitch 6450-P10S
The OmniSwitch 6450-P10S is a standalone switch with eight (8) 10/100/1000 Base-T PoE ports and two
(2) fixed fiber ports (100FX/1000-X).
OmniSwitch 6450-P10S switches support IEEE 1588 Precision Time Protocol (PTP).
All ports support IEEE 802.3af/802.3at.
PoE (four pair) ports 1-4 are compliant with the PoE portion of the Power over HD Base-T (PoH) standard
with a 280W PoE power budget. These ports are labeled “HPoE” on the chassis front panel.
PoE support of up to 30W per port is provided on PoE ports 5 through 8.
Note. The maximum PoE power budget available for all ports is 280W.
Front Panel
OmniSwitch 6450-P10S Front Panel
Item Description
A
System Status LEDs
Provides status on hardware and software.
B
PoH Port Status LEDs
Provides status on HPoE-capable (PoH) ports, including connectivity and link activity.
(These ports are labeled “HPoE” on the chassis front panel.)
C
Back-lit Power Status LED
Illuminates model name on chassis front panel to indicate “power on” status.
D
PoE Port Status LEDs
Provides status on PoE ports, including connectivity and link activity.
E
Console Port
RS-232 console port with an RJ-45 connector. Provides console access to the CLI for
configuration and management.
F
Four (4) 10/100/1000BaseT RJ-45 PoH Ports
Port numbers 1 through 4. Each port provides ~75W of PoH power. (These ports are labeled
“HPoE” on the chassis front panel.)
B
F
H
I
E
G
C DA