Small Form-Factor Pluggables (SFP/SFP+/QSFP+) 40-Gigabit QSFP+ Transceivers
OmniSwitch AOS Release 8 Transceivers Guide January 2017 page 1-25
1. Supports the DDM parameters of Voltage (V), Temperature (T), Current (mA) and Input (dBm). If the
threshold values of the transceiver are ‘0’ then NS will be displayed in the DDM output display.
1. Check for availability of lengths.
2. The QSFP-40G-C7 (7m) cable has been verified for proper operation when connected between OmniS-
witch products. When connecting this cable between an OmniSwitch and other vendors’ equipment, it’s
recommended to verify proper operation prior to network deployment.
QSFP-40G-LR
Four channel 40-Gigabit QSFP+ Optical Transceiver.
Connector Type LC
Standards Supported 802.3ba, QSFP+ MSA
Connections supported 40GBase-LR4
Fiber Type SMF
Wavelength 1310 nm
Optical Power Output -7.0 to +2.3 dBm
Receiver Sensitivity -11.5 dBm
Transmission Distance 10 km
Operating Temperature 0 ºC to 70ºC
Maximum Power Consumption < 3.5 W
Digital Diagnostic Monitoring Supported
1
QSFP-40G-C
Four channel 40-Gigabit QSFP+ Direct Attach Copper Cable
Connector Type Direct Attached Copper
Standards Supported 802.3ba, QSFP+ MSA
Cable Length 40cm, 1m, 3m, 7m
1,2
Wire Gauge 26AWG
Bend Radius 1.69 in.
Digital Diagnostic Monitoring Not Supported
QSFP-4X10G-SR
Four channel 40-Gigabit QSFP+ Optical Transceiver. Connects a single 40G QSFP+ port to four 10G SFP+
ports
Connector Type MPO
Standards Supported 802.3ba, 802.3ae, QSFP+ MSA
Connections supported 40GBase-SR4, 10GBase-SR
To Next Page
Loading...
