Alcatel-Lucent OmniSwitch 2220 - Regulatory Compliance and Safety Information; Standards Compliance; Safety Standards; EMI;EMC Standards

Regulatory Compliance and Safety InformationOmniSwitch 2220 Hardware Guide
Alcatel-Lucent Enterprise OmniSwitch 2220 Hardware Guide
April 2018 • 060524-10 Rev. A Page 15
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and EMC
standards.
Note: All hardware switching modules used in an OmniSwitch switch comply with Class A standards. Modules
with copper connectors meet Class A requirements using unshielded (UTP) cables.
Safety Standards
• US UL 60950-1
• IEC 60950-1 Health and Safety
• CAN/CSA-C22.2 No. 60950-1-03
• NOM-019 SCFI, Mexico
• AS/NZ TS-001 and 60950:2000, Australia
• UL-AR, Argentina
• UL-GS Mark, Germany
• CU, EAC, Russia
• EN 60825-1 Laser
• EN 60825-2 Laser
• CDRH Laser
• IEC 60950-1/EN 60950 with all country deviations
• IEC 60950-1:2005, Second Edition
• CCC, China
• ANATEL, Brazil (Contact for availability)
• BSMI, Taiwan (Contact for availability)
• KCC, Korea (Contact for availability)
In compliance with UL/EN/IEC 62368-1: This equipment is not suitable for use in locations where children are
likely to be present.
EMI/EMC Standards
• FCC Part 15:2012, Subpart B, Class A
• ICES–003:2012 Issue 5, Class A
• ANSI C63.4-2009
• FCC CRF Title 47 Subpart B (Class A)
• VCCI (Class A)
• AS/NZS 3548 (Class A)
• CE marking for European countries (Class A)
• EN 55032 (EMI & EMC)
• EN 61000-3-2
• EN 61000-3-3
• EN 55024 (Immunity)
• EN 61000-4-2