All rights
reserved. Passing on and copying of this document, use and
communication of its contents not permitted without written authorization from
HAN-Networks.
Features and Configurations
4.6 ACS & DRM
4.6.1 Feature description
Adjacent APs need to use different radio channels to prevent interference between them.
APs within range of each other should always be set to non-interfering channels to
maximize the capacity and performance of the wireless infrastructure. Please check chapter
3.1.3 for more detail.
To avoid mutual interference with adjacent APs, ACS (auto channel selection) could be used
to make the AP to check and select a best channel under the radio environment
automatically. The algorithm will help the AP to find the channel with best radio
performance.
And if working on 5G radio, the DRM could be used to define a “Channel List” to make the
AP to select the channels from the list.
4.6.2 Configuration and Recommendation
• Login the WEB UI and go to “Wireless” sub-menu. As below.
• Go to “RF” configuration, and select the AP to be configured.
To Next Page
Loading...
Need help?
General
