All rights
reserved. Passing on and copying of this document, use and
communication of its contents not permitted without written authorization from
HAN-Networks.
✓
show_cluster |wc -l // To check the AP numbers in the cluster
Example:
The AP numbers is the output value minus one.
✓
ps |grep cluster // To check if “cluster” process is working normally
Example:
Two “cluster_mgt” thread existing indicates abnormal behavior as below example:
5.6 Network Management
✓
cat /etc/resolv.conf // To check the DNS server information
Example:
✓
cat /tmp/TZ // To check the Timezone configuration