Alcatel-Lucent Stellar AP Series - Configuration and Recommendation; Load Balancing; Feature Description

Stellar AP | Deployment & Configuration & Troubleshooting Guide 46 |
P a g e
All rights
reserved. Passing on and copying of this document, use and
communication of its contents not permitted without written authorization from HAN-Networks.
4.7.2 Configuration and Recommendation
APC configuration is similar to ACS, which has been described in 5.1.2.
APC could be turned ON/OFF separately on 2.4GHz or 5GHz as below.
4.8 Load Balancing
4.8.1 Feature description
Load balancing is used to make the wireless clients could be associated to the AP with good
performance, by checking the number clients associated, and uplink RSSI info synchronized
between the neighbor APs.