Alcatel-Lucent Stellar AP Series - Useful CLI Commands for APs; System Information Commands

Stellar AP | Deployment & Configuration & Troubleshooting Guide 50 |
P a g e
All rights
reserved. Passing on and copying of this document, use and
communication of its contents not permitted without written authorization from HAN-Networks.
5 Useful CLI Commands
5.1 System information
✓ Free // To check the memory usage.
Example:
✓ Showsysinfo // To check the AP hardware information.
Example:
✓ ps |grep <process> // To check the status of the related software process.
Example:
✓ ps |grep D // To check if there’s any software process in D (dead) state.
Example: