Alcatel-Lucent Stellar AP Series User Manual

Stellar AP | Deployment & Configuration & Troubleshooting Guide 56 |
P a g e
All rights
reserved. Passing on and copying of this document, use and
communication of its contents not permitted without written authorization from HAN-Networks.
✓ iwlist ath01 bitrate //To check the bit rate of ath01 interface. The same for
other interfaces
Example:
✓ iwpriv ath01 get_mode //To check the interface mode of ath01. The same for
other interfaces
Example:
✓ iwpriv wifi0 get_txchainmask or iwpriv wifi1 get_txchainmask //To check the
spatial streams quantity supported by the Steller AP
Example:
✓ telnet 127.0.0.1:7787 then stadb and s //To check the clients supported band
currently detected by the AP
Example:

Alcatel-Lucent Stellar AP Series Specifications

General

Brand	Alcatel-Lucent
Model	Stellar AP Series
Category	Wireless Access Point
Language	English