Alcatel 4038 - Getting Started with Your Phone; Battery and SIM Card Handling

11
Getting started
2
2
To install the battery
1. Slide the battery into the cradle as shown in the picture and press the
battery down flat.
2. Place the back cover as shown in the picture and slide it into place.
To remove the battery
1. Press to switch off the phone.
2. Press the button and slide the battery cover as shown in the picture.
3. Lift up the battery as shown below.
Battery and SIM Card
2.1
XG1_GB_20/11 21/11/02 06:44 Page 11