20
UUssee
ooff
tteerrmmiinnaall
PPrreeppaarraattiioonn
ffoorr
uussee
Delivered terminal specifications are:
- terminal 4074 (models 4074 GB/GB Ex or 4074 GH/GI or 4074 GC),
- battery (NiCd 600 mAh or NiMH 1200 mAh),
- battery box (depending on model).
Charge the terminal by installing it in its support (see p. 27).
SSwwiittcchhiinngg
oonn
tthhee
tteerrmmiinnaall
To switch on the terminal, press key until an audible "beep" is heard and the
display screen lights up. A short startup sequence is then run. If the terminal cannot be
switched on or if the battery symbol is flashing, then either the battery needs charging
or it is not fully inserted into the DECT set.
If the word "OUT" is shown on the display screen, then you are outside the area of
coverage.
To switch off the terminal, press (long press).
To lift the handset, press
To hang up, press
To Next Page
Loading...
