Industrial Environment Mounting Options Mounting OS6855-14/P14 and OS6855-U10 Switches
page 4-30 OmniSwitch 6855 Series Hardware Users Guide September 2011
DIN Rail Mounting
Before DIN rail mounting your equipment refer to the “General DIN Rail Mounting Guidelines” section
for additional mounting kits that may be required.
DIN Rail Mounting - PS-I185AC-P (SDR-240-55) Power Supply
1 The power supply has a factory-installed DIN bracket. To install the power supply, align the center of
the power supply with the rail. Holding the power supply at a slight angle, press the DIN bracket against
the rail and then press down until it clicks into place.
PS-I185AC-P (SDR-240-55) Power Supply - DIN Rail Mounted
To Next Page
Loading...
