13 14
• Regulatory information
The following approvals and notices apply in specific regions as noted.
Getting started
1
....................
1.1 Set-up
Removing or installing the back cover
Removing and inserting SIM card
(1)
You must insert your SIM card to make phone calls. Please power off your
phone and remove battery before inserting or removing the SIM card.
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
and slide it out.
(1)
Check with your network operator to make sure that your SIM card is 3V or
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
To Next Page
Loading...
