38
5. Starting the heating system for the rst time
2. Select language.
pressing the
option arrives.
mode.
The relevant accessory is highlighted if connected:
Pump, 12 V pump. Select Manual if there
is a selector on the pump, otherwise
PWM.
DuoControl, Bottle Switch.
Booster fan.
-
Alde AquaClear UV-C.
Engine pre-heat. Heat the engine using
the Alde heating system.
for increased hot water capacity and
-
5.
Single-zone system
• To change the desired indoor temperature from the status screen, press the menu button multiple times
Raise or lower the temperature using the plus and minus buttons.
Fig. 3. single zone
Fig. 4. single zone
1
To Next Page
Loading...
