51
GB
Automatic climate control is not working satisfactorily
• There are two heating zones in a dual-zone system, but only one zone for cooling. In this case,
set the AC to follow the thermostat in one of the zones. When the AC-controlled zone indicates a
consumption.
low temperatures. If the AC will not cool due to low outdoor temperature, the outdoor sensor can be
temporarily disconnected to test the AC.
•
that if the outdoor temperature is too low, the AC will not run.
Note that in or out of night mode and day mode, the system will wait to see if there is a need to
switch from cooling to heating or vice versa. This is to avoid unnecessarily large temperature
variations in the vehicle.
11. Service menu & resetting
Reset
•
•
• Gas heating - On mode
• Target temperatures - 22.0 °C/ Temperature setting - 22.0 °C
• Hot water - In normal mode
Fig. 22. Control Panel menus
Reset
Fig. 23. Service Information
Service, page 1 Service, page 2
To Next Page
Loading...
Need help?
General
