41
GB
Icon description for the status screen’s main menu (Figs. 10a, b)
Single zone system. Indoor temperature. Displays the current temperature and
temperature.
Dual zone system. Zone icons. Displays the current temperature and whether
desired temperature.
meter is fully coloured-in when hot water reaches boost temperature. Press the
section 6.4 Hot water.
temperature is displayed.
6.3 Set the desired temperature
The temperature can be set from +5°C to +30°C in increments of 0.5°C.
For 1 zone, set the temperature by pressing directly on the plus and minus
buttons.
For 2 zones, press the icon for the zone you wish to set the temperature in.
To leave the menu, tap the menu button.
6.4 Hot water
The boiler has a built-in hot water heater with a volume of around 10 litres.
The boiler can be used even without fresh water being in the heater.
• -
ment in the vehicle.
• On - Hot water switched on.
• Boost - Priority hot water production. The boiler will now prioritise the produc-
tion of hot water for 30 minutes. When 30 minutes have passed, the boiler
returns to its previous setting.
Prioritised hot water production is recommended for increased hot water demand.
• Auto - Hot water switched on and goes automatically to Boost as required.
Auto is only available in 3030 Plus.
Fig. 10a.
Main menus on
the status screen,
single-zone system
Fig. 11. Set
temperature
Fig. 12a.
Set hot
water production,
Alde Compact 3030
Scalding hazard
requirement.
Fig. 10b.
Main menus on
the status screen,
dual-zone system
Fig. 12b.
Set hot
water production,
Alde Compact 3030 Plus
To Next Page
Loading...
