43
GB
Settings menu, Fig. 14
Settings menu, Fig. 15
Pump in constant operation.
when it is cold. Automatic switch-on requires an outdoor sensor to be installed.
Delayed start, automatic boiler start.
230 V. The function is used to start the boiler by connecting 230 V to the vehicle.
but 12 V connected. Some vehicles may be equipped with their own solution
adjusted ± 5 °C if you feel the temperature sensor needs adjusting. Also applies
to outdoor temperature sensor.
Settings menu, Fig. 16
You can also choose whether the status screen should be Normal, Inverted, or
again if touched.
-
-
uously and describe the current status of the boiler. See section 11 Service
Menu & Reset.
Reset. Resets the panel to factory setting. The accessories/features selected
Fig. 15.
Settings menu
Fig. 16.
Settings menu
To Next Page
Loading...
