To Next PageTo Next PageWhat to do if my Alderlea Wood stove has low heat output?
If your Alderlea Wood stove isn't producing enough heat, several factors could be at play. First, ensure you're using dry wood. Wet wood can significantly reduce heat output. Second, the fire might be too small, so try building a larger fire. Lastly, a plugged or restricted chimney can also cause low heat output; inspect and clean it.
Why won't my Alderlea T4 burn overnight?
If your Alderlea Wood stove isn't burning through the night, consider these possible causes. The air control might be set too high; try setting it lower. You might not be using enough wood; unsplit wood is better for overnight burns. Also, ensure you're using good quality, dry wood. If the draft is too high due to excessive chimney height and/or diameter, this can also affect overnight burning.
What to do if wood won't burn in Alderlea T4 Wood stove?
If the wood in your Alderlea Wood stove isn't burning, there might be a few issues. Check the outside air supply for any obstructions, as a blocked combustion air supply can prevent burning. Also, make sure the room air cover is removed to ensure proper draft. The chimney may be plugged or restricted, so inspect and clean it. If the chimney is oversized or otherwise unsuitable, consult your dealer.
How to keep Alderlea T4 glass clean?
To prevent the Alderlea Wood stove glass from getting dirty, ensure you are using dry wood. Also, avoid turning down the air control or damper too soon; wait until there is a good bed of coals and the wood is charred. If the draft is too low, consult your dealer as it may be due to improper chimney height or diameter. Lastly, check for and replace any leaking door gaskets.
What to do if my Alderlea Wood stove won't burn overnight?
If your Alderlea Wood stove won't burn overnight, try setting the air control lower. Using unsplit wood can also help. Be sure to use good quality, dry wood. If the draft is too high due to excessive chimney height or diameter, consider adjustments.
Why is the heat output low on my Alderlea Wood stove?
If your Alderlea Wood stove isn't producing enough heat, make sure you're using dry wood. Build a larger fire. Also, inspect and clean the chimney if it’s plugged or restricted, as this can cause a low draft.
General| Brand | Alderlea |
|---|---|
| Model | T4 |
| Category | Wood stove |
| Language | English |
Understanding chimney fires and methods to avoid them.
Minimum distances to combustibles using single-wall chimney pipe.
Minimum distances to combustibles using double-wall chimney pipe.
Specific clearance requirements for installing the stove in a mobile home.
Addresses problems like dirty glass, creosote, low heat, and burning issues.
Details on warranty terms, coverage periods, and exclusions.
