9
CAUTION!
Always unplug the cord from the wall socket before cleaning.
Never immerse the can opener, cord or plug in water or other liquids.
Care and cleaning
• Before cleaning any part of the can opener, unplug the cord.
• To remove the blade bracket for easy cleaning, lift the blade bracket up and pull
it out. The blade assembly can be cleaned with a damp cloth, then wiped with a
sponge and dried thoroughly. It is not a dishwasher-safe component. Reverse
the procedure to replace the blade bracket.
• Before replacing the blade bracket, wipe the can opener housing, and area
around the drive wheel with a slightly damp cloth or sponge. To remove
stubborn spots, wipe surfaces with nylon or mesh pad and sudsy water,
following with a clean, damp cloth. Do not use abrasive cleaners on any part of
the can opener as they can damage the surface.
• Ensure the can opener is completely dry before next use.
Other Useful Information
Other Useful Information
To Next Page
Loading...
Need help?
General
