Starting⁄stopping the workout
− Before starting your workout, wait until the GPS
watch is receiving a proper GPS signal and the GPS
icon
16
is no longer flashing (also see section
“Finding satellites”).
− Press the ST./STP key
9
to start or stop
the workout.
The workout icon
24
will illuminate.
It will go out when you stop your workout.
Taking lap times
− During your workout, press the LAP/RESET key
11
to
take a lap time.
The laps can also be timed automatically
(see section “AUTO LAP”).
A maximum of 99 lap times are saved
for each workout.
After your workout
Once you have completed your workout, transfer the
training data to the memory of the GPS watch:
− Press and hold the LAP/RESET key
11
until the
message “SAVED!” appears in the top row
15
.
As a result, you have reset all data for the workout to
zero and can start a new workout. The data for the
workout you completed will be stored in the memory
of the GPS watch. You can view them in the history lat-
er (see section “History mode”) or transfer them to the
Crane Connect app on your smartphone/tablet
(see section “Data transfer”).
To Next Page
Loading...
Need help?
General
