Alarm mode
In alarm mode, you can view and set the alarm time.
To access the alarm mode:
− If necessary, tap the MODE key
12
several times until the word “ALARM”
appears in the top row
15
.
The set alarm time will appear after
a moment.
− You can switch the alarm ON or OFF
in the bottom row with the
ST./STP key
9
.
Setting the alarm time
1. Press and hold the
MODE key
12
in alarm mode until the number of
hours flashes in the centre row.
2. Set the hour for the intended alarm time with the
ST./STP
9
and LAP/RESET key
11
.
3. Tap the VIEW key
10
.
The number of minutes will flash in the centre row.
4. Use the ST./STP
9
and LAP/RESET key
11
to set the
minutes for the intended alarm time.
5. Tap the VIEW key
10
.
The alarm has now been set and switched ON.
An alarm signal will sound for 30 seconds at the set
alarm time which you can switch off by pressing any key.
The settings will remain intact and the alarm will “ring”
again the next day.
To Next Page
Loading...
Need help?
General
