Maintenance,
cleaning, storage and transport
Maintenance,
cleaning, storage and transport
Disconnect the soldering iron from the mains before
performing
any
maintenance or adjustments
Maintenance
The soldering iron is virtually maintenance free.
Only use spare
parts
/
accessories from the manufacturer
Repairs should only be carried out by
qualified
technicians or by an authorised
service centre.
Qualified
technicians
must have relevant
training and experience,
be
familiarwith
the design and construction
requirements
of the soldering
iron
and
understand and
follow the safety regulations.
Cleaning
Allow the soldering iron to cool down completely before cleaning. To
avoid damage, do not use aggressive cleaning agents, metal brushes
and
sharp objects such as knives, etc.
Make sure that liquids do not
get
into the
soldering iron.
.
Clean the soldering
iron
using a
soft,
slightly damp cloth
if required. Ensure
that
no
moisture enters the device.
.
Clean the soldering tips using the cleaning sponge included in the supply.
Storage
.
Clean the soldering iron before storage.
.
Keep the soldering
iron
and accessories
in
a safe, cool, dry and well-ventilated
place
in its original
packaging,
out of the
reach
of children when it is not being
used.
.
Do not store the solder
wire
together
with
acids.
Transport
.
Use
the original
packaging
and secure the soldering iron in
place
during
transport.
13
To Next Page
Loading...
