Troubleshooting
Troubleshooting
Problem Possible Gause Rectification
Soldering
iron No
power
supply. Check
that the mains supply
(socket)
functions
does
not heat correctly. Ask a
qualified person
for
advice
if
up.
necessary.
Mains cable or
plug
Get the
mains
cable
replaced by the
defective.
manufacturer or the manufacturer's
representative.
The Soldering tip
is loose.
Unplug
the
power
cord from the mains outlet.
temperature
Allow
the soldering
iron to cool down. Tighten
of the the
fixing screw of the soldering tip.
soldering tip
is too low.
The solder Soldering tip
is not hot Wait untilthe soldering iron is hot enough.
does
not run
enough.
smoothly on
the soldering
iron.
Allow
the soldering
iron to cool down
completely and check
if the tip is loose. Tighten
the
fixing
screw
if necessary.
Technical data
Model
HS-060E-30
Mains connection
23O
-
2t'O V-
/ 50
Hz
Rated
power
30
W
Solder
S-Sn99Cu'1
with flux core, melting temperature
(230-250
o
C), diameter
(1.5
mm)
Protection class I
(the
soldering
iron has to
be
earthed)
The following original spare
parts
are
available from the customer service department of
the manufacturer:
Part description
Part number
Art. No.
Soldering stand
6An8t*
Soldering
tip
(flat)
62tn85
Soldering tip
(pointed)
9 62U86
14
62/n87
Soldering wire
To Next Page
Loading...
