0151 649 1500 1890 946244
www.einhell.co.uk
36
Electric Impact Shredder – GLEKS 2440Use
Connecting up the machine and switching it on
• Connect the 13A plug
9
on the shredder power cable (Fig. 11/Item 9) either to a 13A socket
on the mains supply or via a 13A, 3-core extension power cable to a 13A socket on the mains
supply.
• The shredder can be switched ON (switch position 'I') and OFF (switch position '0') by using
the ON/OFF switch
11
(Figure 11/Item 11).
Overload protection (motor circuit-breaker)
• The motor is protected from overloads by an internal overload switch.
• In case of overloading the equipment will shut down automatically.
To restart, set the On/Off switch
11
to the position 'I' (Fig. 11/Item 11).
• If the motor fails to start, clean the ejector chute
26
.
4
26
1
11
9
Fig. 11
66926_3430345_11026_ug_inner.indd 36 22/03/2016 3:22 pm
To Next Page
Loading...
