ALDI GLEKS 2440 - Turning the Blades

AFTER SALES SUPPORT
0151 649 1500 1890 946244
www.einhell.co.uk
42
Electric Impact Shredder – GLEKS 2440Maintenance and servicing
NOTICE!
For safety we recommend that you have all sharpening and
blade replacement is carried out by a specialist workshop.
Turning the blades
Always wear heavy duty working gloves
• Swing open the loading tunnel
2
by opening the release screw
12
(See Fig. 13a).
• Undo the fastening nut
B
(See Fig. 13b).
• Undo the eight Philips screws
C
(See Fig. 13c) and remove the cover plate.
• Secure the rotary disk so that it cannot rotate (for example by jamming it with a
screwdriver, see Fig. 13d).
• Undo the four blade screws
D
using the hexagon Allen key supplied
15
and remove
the blades
E
(See Fig. 13d).
• Each of the blades can be turned once as they are ground sharp on both long edges.
(Once they have been turned and the second cutting edges become blunted, then
they must be replaced by new blades.) To assemble, proceed in reverse order.
Fig. 13a
2
12
B
Fig. 13b
B
A
Fig. 13c
CC
Fig. 13d
D
D
15
E
66926_3430345_11026_ug_inner.indd 42 22/03/2016 3:22 pm