Pack contents/parts
1
Loading tunnel inlet
2 Loading tunnel
3 Motor housing with cutter plate
4 Plunger
5 Complete chassis
6
Wheels – 2pcs
7
Axle
8 Transport handle
9 Mains plug
10 Mounting for plunger
11 On/Off switch
12 Release screw
13
Wheel hubs – 2pcs
14
Ring wrench - 12mm
15
Hexagon Allen key
16
Screw for chassis assembly – 2pcs
17
Washer for chassis assembly – 2pcs
18
Sleeve (Thick-short) – 2pcs
19
Sleeve (Thin-long) – 2pcs
20
Washer, outside – 2pcs
21
Hexagon Nut – 2pcs
22
Shredded material bag (Not included)
23
Hooks on chassis for shredder debris bag
24
Original operating & safety instructions
25
Quick set-up guide
26
Ejector chute
66926_3430345_11026_ug_cover.indd 5 22/03/2016 3:21 pm
To Next Page
Loading...
