AFTER SALES SUPPORT
01904 727506
www.coreservice.co.uk
17
1200W Lawnmower
GB
GB
IRE
0124 751 50
IRE
Assembly
Assembly
Mounting the lower handle
1. Insert the lower handle into the supports. Ensure the
mounting holes in the lower handle are aligned with the
ones in the supports (See Fig B).
2. Secure the lower handle with the screws and tighten them
with a suitable crosshead screwdriver.
Mounting the upper handle bar
1. Remove the bolts from the knobs and keep them handy.
2. Attach the upper handle to the lower handle and align the
holes in the upper handle with the ones in the lower handle
(See Fig C).
3. Secure the upper handle with the knobs and bolts to the
lower handle and tighten the knobs clockwise.
4. Fix the power cord using the cord clips to the handle (See Fig
D).
Mounting the grass collector
1. Fit the upper part of the grass collector onto the lower part by
fixing all the outer clips correctly (See Fig E).
To Next Page
Loading...
