ALDI GLM32F - Connecting to the Power Supply

AFTER SALES SUPPORT
www.coreservice.co.uk
18
1200W Lawnmower
GB
IRE
01904 727506
GB
0124 751 50
IRE
Assembly
2. Fit the handle onto the top of the grass collector, where there
is the grass full indicator, so that it clicks into place (See Fig F).
3. Hang the grass collector on to the hooks on the back of the
machine (See Fig G&H).
Connecting to the power supply
WARNING! For your safety, the extension cord must be
suitable for outdoor use with sockets protected against
water splashing!
Only use an extension cord not lighter than:
- if rubber insulated, ordinary tough rubber sheathed flexible
cord (code designation 60227 IEC 530);
- if polyvinyl chloride insulated, ordinary polyvinyl chloride
sheathed flexible cord (code designation 60227 IEC 53).
Ensure the extension cord is of the proper size and type for your
product(≥ 1.5mm
2
)!
Always use a residual current supply(RCD) protected supply!
1. Double the extension cord, about a foot from the end. Hook
the loop over the cord strain. (See Fig I)
2. Connect the plug to the main socket. (See Fig J)