GB IRE
GB
01904727501
IRE
019022605
− Before you start work, also observe the quiet hours in your community for
working with machines that produce noise.
Working with the high pressure jet
− Hold the spray gun and the lance tightly with both hands.
− Be prepared for a kickback when you switch on the spray gun.
− Release the safety lock and depress the trigger on the spray gun.
− The high pressure pump starts to run as soon as you switch the spray gun on.
− The high pressure pump stops as soon as you release the trigger of the spray
gun.
Using the adjustable spray lance
CAUTION!
Risk of injury!
The high pressure jet is very hard and can inflict injury.
− Start by working at a substantial distance and reduce it as
needed.
The adjustable spray lance
14
is the universal tool for high pressure work. It enables
you to use 2 types of water jet.
Pushing the nozzle head
23
lengthwise regulates the jet pressure:
− Pull the nozzle head forward to reduce the pressure (low pressure) and push the
nozzle head back to increase the pressure (high pressure) (see fig. 11).
Figure 11
To Next Page
Loading...
Need help?
General
