GB IRE
GB
01904727501
IRE
019022605
3. Take the cap off of the cleaner container
10
on the back of the 2.2 kW high
pressure washer
6
and pull the hose out (see fig. 15).
4. Take the cleaner container out of the holder and, if necessary, fill it will diluted
cleaning solution
20
.
5. Put the cleaner container back in the holder, put the hose back in and screw the
cap back on.
6. Mount the adjustable spray lance
14
on the spray gun
15
.
7. Set the nozzle head
23
to the position for low pressure by pulling it out and
forward (see fig. 11, page 20).
8. Release the safety lock and depress the trigger of the spray gun to begin work.
Cleaning and maintenance
WARNING!
Risk of electric shock!
Performing cleaning and maintenance while the 2.2 kW high
pressure washer is connected may result in an electrical shock.
− Each time before cleaning or maintenance, switch the 2.2 kW high
pressure washer off and pull the mains plug out of the socket.
− Do not clean the 2.2 kW high pressure washer with a high
pressure jet!
Cleaning
Clean the 2.2 kW high pressure washer
6
by wiping the 2.2 kW high pressure washer
and the accessories with a damp cloth.
Dirt filter
The 2.2 kW high pressure washer is equipped with a dirt filter to protect the pump. If
the dirt filter is not kept clean, the flow of water to the 2.2 kW high pressure washer
will be restricted and the pump could be damaged.
Figure 15
To Next Page
Loading...
Need help?
General
