GB IRE
GB
01904727501
IRE
019022605
4. Secure the end of the cord with the cord clamp as shown in the figure.
Transport
− If possible, use the original packaging for transport.
Troubleshooting
WARNING!
Risk of injury!
Tampering with the 2.2 kW high pressure washer could pose a risk
to life due to an electric shock, damage to the 2.2 kW high pressure
washer and void warranty claims:
− Do not tamper with the 2.2 kW high pressure washer on your
own authority.
The following table provides assistance in the event of malfunctions. If the
information provided here is not of success, contact our customer service team or an
authorised service centre.
Fault Cause Solution
Device doesn’t work
Power supply interrupted − Check the power
connection, mains
cord and fuse; have
repairs performed
by an electrician if
necessary
2.2 kW high pressure
washer switched off
− Switch the ON/OFF
switch on
Components defective
e.g. switch, motor
− Consult the customer
service team
To Next Page
Loading...
