GB IRE
GB
01904727501
IRE
019022605
7. Connect the supply hose with the water supply and open the feed valve
(see fig.7). The water temperature may amount to no more than 40 °C.
8. Make sure that the ON/OFF switch
5
of the 2.2 kW high pressure washer is
switched off (OFF position) (see fig. 8).
9. Insert the mains plug in a properly installed socket with earthing contact and
alternating voltage in accordance with the nameplate of the 2.2 kW high pressure
washer.
Operation
NOTICE!
Risk of damage!
Improper handling of the 2.2 kW high pressure washer may result
in damage.
− Familiarise yourself with all control elements before start-up of
the 2.2 kW high pressure washer. Before each use, make sure
that the 2.2 kW high pressure washer is functional.
− Wear suitable clothing as well as ear and eye protection when
working with the 2.2 kW high pressure washer.
− Check the 2.2 kW high pressure washer and accessories for
visible damages.
− Check that all parts of the 2.2 kW high pressure washer are
securely mounted.
− Check whether the water connection and high pressure lines
are tight.
Figure 7 Figure 8
To Next Page
Loading...
Need help?
General
